ZMODO Funlux Spécifications Page 1

1

Product Introduction 2.3 IP Camera (ZP-IBT15-S) Camera Image Sensor ¼" color CMOS sensor Minimum Illumination 0.1 Lux (IR LED On) / F 1.2 Shutt

Product Introduction 2.4 2.3 Package Contents Before proceeding with any setup procedures, please make sure that your package includes the following

Product Introduction 2.5 • (4) 720P Bullet IP Network Cameras (ZP-IBT15-S) • 4-Channel Security NVR (ZP-NE14-S) • (2) 15m (50ft) Camera sPoE Cable

Product Introduction 2.6 2.4 Getting Familiar with your NVR Main Functions & Features Live Remote Viewing Access your NVR remotely from any

Product Introduction 2.7 Front Panel Rear Panel

Product Introduction 2.8 Mouse

First-time Setup 3.1 First-time Setup 3 3.1 NVR Installation HDD Installation IMPORTANT: Your system will not be preinstalled with a hard disk

First-time Setup 3.2 1. Make sure your NVR is unplugged from its power source and slide the top panel off of the NVR. 2. Connect the SATA power an

First-time Setup 3.3 3. Once connected, place the HDD into the NVR with the cables placed as shown. 4. Holding the hard drive and the NVR, gently

First-time Setup 3.4 5. Slide the NVR panel back on and locate the 5 black Phillips screws (found in kit). Apply the screws in the three holes on the

2

First-time Setup 3.5 7. The system will begin formatting the HDD, and will automatically reboot once the formatting is complete. Connecting your

First-time Setup 3.6 Connecting an External Alarm NOTE: A large portion of the installation of an alarm will vary based on the type of alarm. Becaus

First-time Setup 3.7 3. Power on and login to your NVR using the default user 'admin' and the default password '111111'. Once you

First-time Setup 3.8 5. Click the [Add Device] option on the left, then click [Auto Add] to automatically search for IP cameras. Please wait 3-5 minu

First-time Setup 3.9 Mounting the Camera IMPORTANT: Please complete the instructions for "Connecting the cameras to the NVR" prior to mount

First-time Setup 3.10 3.3 NVR First-Time Startup Power on your NVR and double-click anywhere on the screen. On the login screen, a Startup Wizard w

First-time Setup 3.11 Startup Guide Explained Network Time Protocol: When enabled, the NVR system will automatically set the date and time settings t

First-time Setup 3.12 3.4 Home Screen Introduction The home screen is the main screen of your NVR, displaying the live-video stream from the connect

First-time Setup 3.13 The quick-menu includes the following options: Main Menu Use the main menu to access all of the full features of the NVR.

Using the NVR 4.1 Using the NVR 4 4.1 Main Menu Detailed Use the main menu to access all of the full features of the NVR. The following chapter

3 ! Before using this product... ... 1.1!11.1! Understanding the manual ...

Using the NVR 4.2 The system can support up to 16 accounts, with two different account types: Administrator: Has full access to all features of the

Using the NVR 4.3 Display Settings The NVR offers several options to best customize the content displayed on the home-screen of your NVR. Channel

Using the NVR 4.4 System Log The NVR will provide notifications when certain events occur. Such events could be, but are not limited to: a missing h

Using the NVR 4.5 Disk Drive Info This menu allows you to review important HDD information, format HDD's and change it's settings. Har

Using the NVR 4.6 System Settings Use this menu to view and change basic settings and information of the NVR. From this menu, you may enable the sta

Using the NVR 4.7 Help & FAQ Funlux offers comprehensive support for our users. This page provides links to some of our resources that will help

Using the NVR 4.8 Device Management Use the Device Management menu to manage the IP cameras connected to the NVR. Add Device Search and Add All

Using the NVR 4.9 Adding a device: You will have four options different methods to add a device: 1) The system will automatically search for and ad

Using the NVR 4.10 Network Transmission Stream Changes the video streaming settings for devices that are connected to the NVR remotely (devices that a

Using the NVR 4.11 Network Settings Basic Settings Selecting DHCP will allow the NVR to manually configure the IP address and network parameters.

4 Event Management ... 4.13!4.2! Camera

Using the NVR 4.12 DDNS NOTE: For advanced users only. Router port-forwarding is required. Use this page to set up a DDNS (Dynamic DNS Server) for

Using the NVR 4.13 NOTE: The UPNP settings for the device are not the same as the UPNP settings on your router and do not pose the same security risks

Using the NVR 4.14 quality. During stationary scenes, the NVR will record at a lower framerate to optimize storage capacity. Motion Detection Thi

Using the NVR 4.15 b. Once changes have been made, always press [Save] before navigating to another page or editing schedules for another day otherwis

Using the NVR 4.16 External Alarm The NVR supports up to four external alarm inputs and one external alarm output. External alarm inputs may include

Using the NVR 4.17 b. Once changes have been made, always press [Save] before navigating to another page or editing schedules for another day otherwis

Using the NVR 4.18 4.2 Camera Controls When on the home screen, you can access the NVR's camera controls by double-clicking on the desired chan

Using the NVR 4.19 Image Orientation Change the image orientation. "Flip" will flip the image vertically, "Mirror" will flip the

Using the NVR 4.20 Playback Access and review your surveillance footage from this menu. Video Playback 1. Select the channel of your recording

Using the NVR 4.21 Backup The system allows you to backup specific files from your machine onto an external USB drive. The following instructions

Before using this product... 1.1 Before using this product... 1 1.1 Understanding the manual How this manual is organized This manual is speci

Using the NVR 4.22 4.3 Remote-viewing Setup Remote viewing allows you to access your NVR from any location in the world for unprecedented surveilla

Using the NVR 4.23 1. Locate the NVR information on the outer casing of your system. 2. Connect your mobile device to the same local network as your

Using the NVR 4.24 4. Add your NVR by scanning the QR code found in step 1. There are three available methods to add your NVR device. We recommend

Using the NVR 4.25 6. Select your system from the device list to view the live video stream. Go back to the 'Device List' section and selec

Using the NVR 4.26 8. Your device is now activated for remote surveillance! You will now be able to view your NVR on any Android or iOS device with i

5.1 Support 5 5.1 Troubleshooting Most problems encountered are common problems and are easily correctible. For your convenience, please refer

5.2 The NVR is detecting offline IP cameras 1. Access the [Device Management] page and unmark the "Search and Add All Devices Automatically"

5.3 Remote control is not detected by the system There are no batteries in the remote or the batteries are dead Install two new AAA alkaline batterie

5.4 Products must be free of any permanent alterations including, but not limited to paint, altered connection inputs, severed wires or cables, or in

5.5 Return Shipping For your protection, we recommend that you insure your return and use a traceable carrier that can provide you with delivery conf

Before using this product... 1.2 • Chapter 4 Using the NVR The NVR's full features can be utilized through the new and revolutionary user-frien

5.6 1. An item is returned to Funlux for repair under the manufacturer’s one year warranty period and that same item was found to be defective and un

5.7 5.3 Funlux Support Online Resources For full instructional manuals, software downloads, and more, please visit: http://www.zmodo.com/support

Before using this product... 1.3 1.2 Safety Precautions Please read and follow these instructions for your safety while operating and setting up the

Product Introduction 2.1 Product Introduction 2 2.1 Product Overview This Funlux NVR system is specially designed to safeguard your home or busi

Product Introduction 2.2 2.2 Technical Specifications NVR (ZP-NE14-S) Video Input / Output IP Video Input 4 Channel VGA Output 1 channel Recording